Workholding hydraulic cylinders are used to position and clamp parts in industrial applications such as stamping, machining, testing stations, and factory automation and assembly lines. They can be used to replace manual clamps when automating processes for production, hydraulic presses, and machining tasks. They are also used for locking, opening, and closing tasks
-
Ports Against Plate Mounting Against Ports Swing Clamp Cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
-
Standard Straight Line Clamping Ports Against Mounting Plate Cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
-
Body Threaded cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
-
Ports In Flange Mounting Cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
-
Flange Mounting Cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
-
Ports Against Mounting Plate Without Governor cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
-
Ports Against Mounting Plate With Governor Cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
-
Standard Mounting Against Ports Swing Clamp Cylinder
1.Swing-clamp hydraulic cylinders are used in maching tooling ,Mass helpful to improve production efficiency.
2.Swing-clamp hydraulic cylinders rotate in addition to extending and retracting ,allowing a clamp to be rotated out of the way while a workpiece is moved onto the fixture .The clamp then holds the workpiece in place during the operation.
3.The cylinder is made of high strength ,carbon ,long service life.
4. Use the hydraulic corer cylinder, suggest to add a flow governor to control speed, and in the comer stroke, do not hold the workpiece, to avoid damage to the cylinder block and internal parts.
5. When the length of the pressing plate needs to be increased, it should not be more than 1.5 times the original length.
Home
WhatsApp
Products
